Notes:
The video light can only be used when the camcorder is on.
Set the white balance to artificial light (_,_) when using the
video light to avoid a "washed-out" look
When not using the video light, turn it off to save battery
powe_
,_ Cautions
Never operate the video light closer than I foot to people or other
objects,
The video light becomes very hot. Do not touch it during use or right
after use. Serious injury may result.
Do not place the camcorder in a carrying case right after using the
light.
Never operate the video light close to flammable or explosive
material.
Consult your nearest RCA authorized service center to replace the
video light.
The video light and bulb need to cool for approximately 30 minutes
after use before the bulb assembly is replaced
41
To Next Page
Loading...
