RCA CC9373 - Downloading Still Images to Your Computer

Vie in% @@ nl@alin%
Downloading Still Images to Your Computer
Windows PC
Th(,re are 2 ways you can access your images using USB in Windows: 1) manually
through the Progral_as menu, or 2) by accessing th(' newly assign_'d drive directly.
Important: YOUmust first connect the camcorder to your computer, make sure the
camcorder is on, have pictures already stored on the memory card, and install the
USB DRIVER CD-ROM before you can download your images (see pages 8!-82.)
Programs Menu
1. C]ick tl]( _ Sta_ button in the lower h'fl hand corn(q" of your scre(q].
2. Select t#'ograms, followed by PbotoSudio 2(X)O. I)ouble click PhotoMudio 20(XZ (The
software launches.)
3. In PhotoStudio 2000, select the File menu, fi)llowed by Ope_7.
4. Finally, choose the appropriate drive to access and open your images.
5. When finished, dose the software, then turn off the calzacorder.
Note: YOu can double click a still image to automatically open it in OhotoStudio
2000, If it doesn't open, you must change the software application default your
computer uses to open JPEG files (see Changing the JPEG Default on page 85.)
Direct Drive Access
1. I)oublc click My Computer (The/v 0` (_?Jmpztter window opens, showing you all the
awdlable drives.)
2. Double click the appropriate drive to access and open your ilzaages.
3. When finished, dose the software, then turn off the calzacorder.
Note: YOucan double click a still image to automatically open it in PhotoStudio
2000, If it doesn't open, you must change the software application default your
computer usesto open JPEGfiles (seeChanging the JPEGDefault on page 85.)
Very important:
Never turn off the camcorder or remove the power (battery or AC) while
downloading still images. The card might become corrupt.
Use the power supply instead of the battery pack to power the camcorder when
downloading still images.
83