Vie in@ anl @@ nl@alin@
Macintosh
Important: YOu must first connect the camcorder to your computer, make sure the
camcorder is on, have pictures already stored on the memory card, and install the
USB DRIVER CD-ROM (if necessary) before you can download your images (see
pages 81-82.)
As soon as you set tim Power switch to _, _NB M_)DEappears on the LCI) monitor
and ACCIiSSIN(} HLlxB'appears as the files are downloaded to your comput_'r.
1. Double click on tim untitl_,ddrive icon on your desktop, followed by the D(2I,*A
f\)tder, and the lOOI_(/ADVfolder.
2. Drag all the still images you want to move to your desktop. (The files are copied.)
3. When finished, drag the u_titlcd drive icon to the trash and disconnect the USB
cable.
4. Close the software, then turn off the camcorder.
Very important:
Never turn off the camcorder or remove the power (battery or AC) while
downloading still images. The card might become corrupt.
Use the power supply instead of the battery pack to power the camcorder when
downloading still images.
84
To Next Page
Loading...
