RCA CC9373 - Page 93

Advanced Fea u s
DEMO
MODE
ON
Factol)_ Preset: Demonstrates certain functions automatically.
When DP2MO MODE is set to ON and you have exited all
menus, tim demonstration starts. Operating tim Power zoom
lever during the demonstration stops the demonstration
temporarily. If the Power zoom lever is not moved for more
than 1 minute after that, the demonstration will resume.
'lk) cancel the demo mode, rotate tile Power switch to []
(manual record) and press in the MENU dial while the demo
is in progress. Rotate the MENU dial to highlight SYS ['EM.
Press in the MENU dial to select it. (['he System Menu
appears.) Rotate the MENU dial to highlight DEMO MODE.
Then press in the MENU dial to select it. Rotate the MENU dial
to highlight OFt_ Then press in tile MENU dial again to
select it.
Note: When a tape is loaded in the camcorder, the
demonstration is not available.
OFF Automatic demonstration will not take place.
CAM CANCEL Factory Preset: Does not reset all settings to the facto1T presets.
RESET
EXECUTE Reset all settings to the facto W presets.
Display Menu
ON LCD Displays most information from the camcorder s displ_y on the
SCREEN LCI) monitor. "Phi, only info to be displayed on J conn_*cted TV
is the date, time, and time code.
LCD/'IW Factoi)_ Preset: Displays tim infi)rmation from tim camcorder's
display on both tile LCD monitor and a connected 'l'Vi
DATE/ OFF 'l'he date/time does not appear.
"rIME
AUTO
ON
Factol)_ Preset: Displays tile date/time for approx. 5 seconds in
tile following cases:
• When tile Power dial is set from OFF to _ or [].
• When vide() playback starts. ['he camcorder displays tile
date/time when scenes are recorded.
• When tile date is changed during video playback.
The date/time is alw_tys displayed.
91