37
When the joysticks are released and centered, the AV will actively brake, level, and be
locked to a position in 3D space, compensating for wind and other forces.
Instructions on how to program the joysticks, switches, and button functions are found in
Settings section of this manual.
THROTTLE UP / ASCEND
To ascend the AV, push the left joystick forward. The farther the joystick is pushed from
its centered position, the faster the AV ascends on the vertical axis.
THROTTLE DOWN / DESCEND
To descend the AV, push the left joystick backward.
YAW LEFT / Counterclockwise
To rotate the AV counterclockwise (CCW), move the left joystick to the left.
YAW RIGHT / Clockwise
To rotate the AV clockwise (CW), move the left joystick to the right.
PITCH FORWARD
To move the AV forward, move the right joystick up.
PITCH BACK
To move the AV in reverse, move the right joystick down.
ROLL LEFT
To roll the AV to the left, move the right joystick left.
ROLL RIGHT
To roll the AV to the right, move the right joystick right.
4.8 STEALTH MODE
Stealth Mode disables external lighting and audible sounds from the AV. Boot up sounds,
loss of link, and disarming event sounds are all disabled. The ground sensor is disabled
during Stealth Mode and the AV will behave differently during takeoff and landing. Be
careful when launching and landing the aircraft.
Note: Even in Stealth Mode, the AV lighting still
briefly illuminates during boot-
Multifunction button on the back of the AV to
change the lighting setting from white, IR, and off.
Stealth mode is persistent through battery changes and power cycles.
To enable Stealth Mode:
To Next Page
Loading...