RFL IMUX 2000 - Page 209

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
Table 7-2 - continued. Valid command field entries
Command Description
EVENT
Lists Sequence Of Events information for a given node.
Command example:
3:TERM:EVENT:1,BLOCK1;
Response:
*OK
FROM NET ADDRESS=3
EVENT NUMBER 1
DATE=05:11:97
TIME=11Hrs.:32Mins.:03Secs.
ALARM ACTIVE 05/11/1997 11:32:03:147
CM4R TERM
RECEIVER OUT OF FRAME;
TIME?
Used to determine the time set in the common module identified in the address field.
Command example:
1:DI-A:TIME?:;
Response:
*OK
FROM NET ADDRESS=1
DATE=03-25-1997
TIME=11Hrs.:49Mins.:21Secs.;
TRAP?
Used to determine the SNMP trap settings in the common module identified in the
address field.
Command example:
1:TERM:TRAP?:;
Response:
*OK
FROM NET ADDRESS=1
SIO TRAP=OFF
FDL TRAP=OFF;
IMUX 2000E1 RFL Electronics Inc.
February 28, 2006 7-11 (973) 334-3100