Polling Reception
127
2
A Press [Transmission Mode].
B Press [Polling RX].
C To use Default ID/Free Polling Reception, check that [Default ID / Free Polling
RX] is selected, and then press [OK].
To cancel Polling Reception, press [Cancel]. The display returns to that of step
B
.
D To use ID Override Polling Reception, select [ID Override Polling Reception],
specify a 4-digit ID using the number keys and [A], [B], [C], [D], [E], and [F],
and then press [OK].
“ID Override: ” and the entered Polling ID are shown above the highlighted
[Polling RX].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To cancel Polling Reception, press [Cancel]. The display returns to that of step
B
.
E Press [OK].
The standby display appears.
To Next Page
Loading...
