Ricoh 3045 - Using as the Netware Print Server; Remote Printer; When Using the Postscript 3 Printer Driver

Using as the NetWare Print Server / Remote Printer
29
1
Using as the NetWare Print Server / Remote
Printer
When using the PostScript 3 Printer Driver
Important
❒ In an IPv6 environment, Netware servers cannot be used.
Follow the procedure below to set up the PostScript 3 printer driver.
A In the [Printers] or [Printers and Faxes] window, open the printer properties.
B Click the [PostScript] tab.
When using Windows 2000 / XP or Windows NT 4.0, click the [Device Set-
tings] tab, and then proceed to step to clear the check box.
C Click [Advanced].
D Clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes, and
then click [OK].
E Click [OK] to close the printer properties dialog box.