Transmission
74
1
Note
❒ For Memory Transmission and Immediate Transmission, insert a pause
between parts of a number. For On Hook Dial and Manual Dial, no pause
is needed.
❒
The Advanced Features function programmed in the destination list is unavailable.
❒ For the maximum number of digits for a destination, see “Maximum Values”.
Reference
p.291 “Maximum Values”
Redial
The machine stores the latest destinations specified for each transmission meth-
od. This function saves time when you are sending to the same destination re-
peatedly, as you do not have to enter the destination again.
Important
❒ The following kinds of destinations are not stored:
• Destinations specified using the destination list
• Destinations specified as a group destination
• Destinations dialed as Receiving Stations for Transfer Request
• Destinations dialed using the external telephone
• Destinations dialed by Redial (regarded as already stored in memory)
• Second and later destinations broadcasted to
• Destinations specified in the LAN-Fax Driver on the computer
A Place the original, and then select the scan settings you require.
B Press the {Pause/Redial} key.
To Next Page