2
Setting Up the Machine on a Network
This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒ These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
❖ Viewing the Information Displayed in the List
$ These items must be set to use the function. Be sure to set them before at-
tempting to use the corresponding function.
These items must be set if required.
Printer/LAN-Fax
Interface Settings
Ethernet Interface Set-
tings/Network
IP Address $
Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
*2
$
NCP Delivery Proto-
col
NW Frame Type
SMB Computer Name
SMB Work Group
Ethernet Speed
LAN Type
*1
$
Ping Command
Permit SNMP V3
Communication
Permit SSL / TLS
Communication
Host Name
Machine Name
To Next Page
Loading...
