Monitoring and Configuring the Printer
80
2
status
Use the “status” command to display the printer status.
❖ view messages
msh> status
Reference
p.101 “System Log Information”
syslog
Use the “syslog” command to display the information stored in the printer's sys-
tem log.
❖ View message
msh> syslog
Reference
p.101 “System Log Information”
upnp
Use the “upnp” command to display and configure the universal plug and play.
❖ Public URL display
msh> upnp url
❖ Public URL configuration
msh> upnp url "string"
• Enter the URL string in the character string.
❖ Deleting Public URL
msh> upnp clear url
To Next Page
Loading...
