Monitoring and Configuring the Printer
70
2
prnlog
Use the “prnlog” command to obtain printer log information.
❖ Print logs display
msh> prnlog
• Display 20 previous print jobs.
msh> prnlog “ID Number”
• Specify the ID number of the displayed print log information to display ad-
ditional details about a print job.
Reference
p.87 “Getting Printer Information over the Network”.
rendezvous
Use the “rendezvous” command to display rendezvous-related settings.
❖ View settings
rendezvous settings are displayed.
msh> rendezvous
❖ Rendezvous service name setting
You can specify the rendezvous service name.
msh> rendezvous cname “computer name”
• The computer name can be entered using up to 63 alphanumeric charac-
ters.
❖ Rendezvous Installation location information setting
You can enter information about the location where the printer is installed.
msh> rendezvous location “location”
• Information about location can be entered using up to 32 alphanumeric
characters.
❖ Setting order of priority for each protocol
•diprint
msh> rendezvous diprint [0–99]
•ipp
msh> rendezvous ipp [0–99]
You can specify the order of priority for “diprint” and “ipp”. Smaller numbers
indicate higher priority.
To Next Page