Ricoh 3045 - Netware

Monitoring and Configuring the Printer
68
2
❖ IPP user configuration
Configure IPP users according to the following messages:
msh> ipp user
The following message appears:
msh> Input user number (1 to 10):
Enter the number, user name, and password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the following message appears:
User configuration changed.
netware
Use the “netware” command to view and configure the NetWare settings such
as the print server name or file server name.
❖ Netware Printer Server Names
msh> netware pname character string
• Enter the NetWare print server name using up to 47 characters.
❖ Netware File Server Names
msh> netware fname character string
• Enter the NetWare file server name using up to 47 characters.
❖ Encap type
msh> netware encap {802.3|802.2|snap|ethernet2|auto}
❖ Remote Printer Number
msh> netware rnum {0–254}
❖ Timeout
msh> netware timeout {3–255}
❖ Printer server mode
msh> netware mode pserver
msh> netware mode ps
❖ Remote printer mode
msh> netware mode rprinter
msh> netware mode rp
❖ NDS context name
msh> netware context character string