Ricoh 3045 - Setting up PPD Files; Setting up Options

Mac OS Configuration
52
2
PPD Files
A Double-click the CD-ROM drive icon.
B Double-click the [Mac OS 8 and 9] folder.
C Double-click the [Printer Descriptions] folder.
D Double-click the folder of the language you are using.
E Open the [Disk1] folder.
F Drag the PPD file and the plugin file into [Printer Descriptions] in [Extensions]
under [System Folder].
G Restart the Mac OS.
Setting Up PPD Files
Important
❒ Make sure that the printers are connected to an AppleTalk network before
performing the following procedure.
A On the [Apple] menu, click [Chooser].
B Click the Adobe PS icon.
C In the [Select a PostScript Printer:] list, click the name of the printer you want
to use.
D Click [Create].
E Click the printer you want to use, and then click [Setup...].
A PPD file is set up and the Adobe PS icon appears at the left of the printer
name in the list. Follow the procedure on p.52 “Setting Up Options” to make
option settings; otherwise close the [Chooser] dialog box.
Setting Up Options
A On the [Apple] menu, click [Chooser].
B Click the Adobe PS icon.
C In the [Select a PostScript Printer:] list, click the name of the printer you want
to use, and then click [Setup...].
D Click [Configure].
A list of options appears.