Using SmartDeviceMonitor for Admin
41
2
Locking the Menus on the Machine's Control Panel
Follow the procedure below to lock the menus on the machine's control panel.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using TCP/IP SNMP v3, enter the user authentication.
C Select a machine.
D On the [Tools] menu, point to [Device Settings], and then click [Lock Operation
Panel Menu].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the user name and password, consult your network admin-
istrator.
The [System] page of Web Image Monitor appears. Enter required setting
items.
F Select [Level 1] or [Level 2] in the [Protect Printer Operation Panel] list.
G Click [Apply].
H Quit Web Image Monitor.
I Quit SmartDeviceMonitor for Admin.
Note
❒ For details about setting items, see Help in the [General Settings] on [Config-
uration] page.
Changing the Paper Type
Follow the procedure below to change the paper type.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using TCP/IP SNMP v3, enter the user authentication.
To Next Page
Loading...
