Changing the Settings of Files in Memory
193
4
D Press [Add].
Pressing switches the destination list between fax number, e-mail ad-
dress, and IP-Fax destination.
E Specify the destination using the number keys or soft (on-screen) keys.
To add an e-mail address, press [Manual Input], and then specify the destination.
You can also program a SUB Code or SEP Code by pressing [Adv. Features].
F Press [Exit].
Repeat from steps
C
through
E
, if you want to add another destination.
G Press [Exit].
The standby display appears.
To Next Page