Monitoring and Configuring the Printer
90
2
Memory Low: Fax Scanning Memory shortage has occurred while transmitting the
fax.
Memory Low: Scanning Memory shortage has occurred while the scanner was
working.
Miscellaneous Error Other error has occurred.
Mismatch: Paper Size Indicated paper tray does not contain paper of select-
ed size.
Mismatch: Paper Size and Type Indicated paper tray does not contain paper of select-
ed size and type.
Mismatch: Paper Type Indicated paper tray does not contain paper of select-
ed type.
Near Replacing: Black PCU Prepare the new black photoconductor unit.
Near Replacing: Develop. Unit K Prepare the new development unit (black).
Near Replacing: Fusing Unit Prepare the new fusing unit.
Nearly Full: Waste Toner Waste toner bottle is nearly full.
Need more Staples Stapler has almost run out of staples.
No Paper: Interposer Tray There is no paper in interposer unit.
No Paper: Selected Tray There is no paper in specified tray.
No Paper: Tray 1 There is no paper in tray 1.
No Paper: Tray 2 There is no paper in tray 2.
No Paper: Tray 3 There is no paper in tray 3.
No Paper: Tray 3 (LCT) There is no paper in tray 3 (Large Capacity tray).
No Paper: Tray 4 There is no paper in tray 4.
Not Detected: B2 Lever B2 lever is not correctly set.
Not Detected: Black Toner Black toner is not correctly set.
Not Detected: Develop. Unit (K) The development unit (black) is not correctly set.
Not Detected: Duplex Feed Unit The duplex unit is not correctly set.
Not Detected: Duplex Unit The duplex feed unit is not correctly set.
Not Detected: Finisher Finisher is not correctly set.
Not Detected: Fusing Unit The fusing unit is not correctly set.
Not Detected: Input Tray The paper feed tray is not correctly set.
Not Detected: Interposer Interposer unit is not correctly set.
Not Detected: PCU The photoconductor unit is not correctly set.
Not Detected: PCU (K) The photoconductor unit (black) is not correctly set.
Not Detected: Tray 1 Tray 1 is not correctly set.
Not Detected: Tray 2 Tray 2 is not correctly set.
Not Detected: Tray 3 Tray 3 is not correctly set.
Messages Description
To Next Page
Loading...
