Using PostScript 3
84
3
How to Use Document Server
Follow the procedure below to print a document using the Document Server
function.
Important
❒ An optional hard disk drive is required to use the Document Server function.
Windows 95 / 98 / Me
A In the application, click [Print] on the [File] menu.
The [Print] dialog box appears.
B Select the printer, and then click [Properties].
C Click the [Setup] tab.
D In the [Job Type:] list, click [Document Server].
E Click [Details...].
F Enter a user ID, file name, and password in the dialog box that appears. The
file name and password are optional.
G Click [OK].
H Start the printing from the application's [Print] dialog box.
Windows 2000 / XP, Windows Server 2003, Windows NT 4.0
A In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
B Right-click the printer icon, and then click [Printing Preference] on the com-
mand menu.
If you are using Windows 2000, select the printer, and then perform the fol-
lowing steps.
If you are using Windows XP or Windows Server 2003, select the printer, and
then click [Preferences].
C Click the [Job Log] tab.
D In the [Job Type:] list, click [Document Server].
E Enter a user ID, file name, and password in the dialog box that appears. The
file name and password are optional.
F Click [OK].
If you are using Windows 2000, perform the following steps.
To Next Page