2. Install the NVRAM on the new BCU after you replace the BCU.
• Make sure the NVRAM is correctly installed on the BCU. Insert the NVRAM in the NVRAM
slot with the "half-moon" pointing [A] to the downward side.
3. Reassemble the machine.
4. Turn on the main power of the machine.
5. "SC995-01" occurs.
6. Enter the serial number with SP5811-004.
7. Turn the main power of the machine off and on.
Removing the BCU with bracket
1. Right cover (page 90)
2. Drive unit fan base (page 162 "Drive Unit Fan")
4. Replacement and Adjustment
240
To Next Page
Loading...
