Service SP Mode Tables
SP1-XXX (Service Mode)
1001 Bit Switch
001 Bit Switch 1 0 1
bit 0 DFU - -
bit 1 Responding with the hostname as the sysName 0: Model
name (PnP
name)
1: Hostname
This Bit Switch can change the value of the sysName.
0: (default): Model name (PnP name)
1: Host name
bit 2 DFU - -
bit 3 No I/O Timeout 0: Disable 1: Enable
Enable: The machine I/O Timeout setting will have no effect. I/O Timeouts will never
occur.
bit 4 SD Card Save Mode 0: Disable 1: Enable
Enable: Print jobs will be saved to an SD Card in the GW SD slot.
bit 5 [PS and PDF] Paper size error margin 0: ±5pt 1: ±10pt
When a PS job is printed by using a custom paper size, the job might not be printed
because of a paper size mismatch caused by a calculation error. By default, the
error margin for matching to a paper size is ±5 points. By enabling this Bit Switch,
the error margin for matching to a paper size can be extended to ±10 points.
bit 6 DFU - -
bit 7 [RPCS,PCL]: Printable area frame border 0: Disable 1: Enable
Prints all RPCS and PCL jobs with a border around the printable area.
1001 Bit Switch
5. System Maintenance Reference
258
To Next Page
Loading...
