1-105-082 TargetTemp AF Rdy *ENG [100 to 180 / 160 / 1 deg/step]
Specifies the target temperature for the maintain mode after the machine has
reached the target temperature in warm-up mode.
1-105-083 Rcvry Target Temp *ENG [100 to 180 / 160 / 1 deg /step]
Specifies the target temperature for the print mode without printing job after the
machine's recovery.
1-105-087 Thick 2:FC:S:Ends *ENG [100 to 180 / 140 / 1 deg/step]
1-105-088 Thick 2:BW:S:Ends *ENG
1-105-089 Thick3:FC:S:Cntr *ENG [100 to 180 / 160 / 1 deg/step]
1-105-090 Thick 3:FC:S:Ends *ENG
1-105-091 Thick3:BW:S:Cntr *ENG
1-105-092 Thick 3:BW:S:Ends *ENG
1-105-109 MThick:FC:S:Cntr *ENG [100 to 180 / 175 / 1 deg/step]
1-105-110 MThick:FC:D:Cntr *ENG
1-105-111 MThick:BW:S:Cntr *ENG
1-105-112 MThick:BW:D:Cntr *ENG
1-105-113 M-Thick:FC:S:Ends *ENG
1-105-114 M-Thick:FC:D:Ends *ENG
1-105-115 M-Thick:BW:S:Ends *ENG
1-105-116 M-Thick:BW:D:Ends *ENG
5. System Maintenance Reference
280
To Next Page
Loading...
