2-412-010 PTR:Normal:2nd:S3 *ENG [100 to 995 / 325 / 5%/step]
165 mm > S3 size ≥ 139 mm
(Paper width)
2-412-011 PTR:Low:1st:S3 *ENG [100 to 995 / 135 / 5%/step]
165 mm > S3 size ≥ 139 mm
(Paper width)
2-412-012 PTR:Low:2nd:S3 *ENG [100 to 995 / 100 / 5%/step]
165 mm > S3 size ≥ 139 mm
(Paper width)
2-412-013 PTR:Normal:1st:S4 *ENG [100 to 995 / 220 / 5%/step]
139 mm > S4 (Paper width)
2-412-014 PTR:Normal:2nd:S4 *ENG [100 to 995 / 330 / 5%/step]
139 mm > S4 (Paper width)
2-412-015 PTR:Low:1st:S4 *ENG [100 to 995 / 220 / 5%/step]
139 mm > S4 (Paper width)
2-412-016 PTR:Low:2nd:S4 *ENG [100 to 995 / 330 / 5%/step]
139 mm > S4 (Paper width)
2413 [PlnT:SizEnvCor:BW] DFU
Adjusts the size correction coefficient table for the paper transfer roller current for
each paper size. SP2403 and SP2407 are multiplied by these SP values.
Normal: 260 mm/sec, Low: 85 mm/sec
2-413-001 PTR:Normal:1st:S1 *ENG [1 to 100 / 19 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-413-002 PTR:Normal:2nd:S1 *ENG [1 to 100 / 14 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-413-003 PTR:Low:1st:S1 *ENG [1 to 100 / 38 / 1/step]
S1 size ≥ 194 mm (Paper width)
2-413-004 PTR:Low:2nd:S1 *ENG [1 to 100 / 11 / 1/step]
S1 size ≥ 194 mm (Paper width)
Engine SP Mode Tables - SP2000
313
To Next Page
Loading...
