2-424-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-424-002 PTr:Std:2nd *ENG
2-424-003 PTr: Low : 1st *ENG
2-424-004 PTr: Low : 2nd *ENG
2-424-005 SepaDC:Std:1st *ENG
2-424-006 SepaDC:Std:2nd *ENG
2-424-007 SepaDC:Low:1st *ENG
2-424-008 SepaDC:Low:2nd *ENG
2425 [HH-s: LE Correct]
HH Condition Small Size Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in
each mode. SP2403 and SP2407 are multiplied by these SP values.
Line Speed -> Std: 260 mm/sec, Low: 85 mm/sec
2-425-001 PTr:Std&Low:1 *ENG [0 to 995 / 100 / 5 %/step]
2-425-002 PTr:Std&Low:2 *ENG
2430 [Plain1: EnvCor] DFU
Plain 1: Environment Correction
2-430-013 TblSepaDC:Std:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction
coefficient table for the
discharge plate DC for each
printing side.
2-430-014 TblSepaDC:Std:2nd *ENG
2-430-015 TblSepaDC:Low:1st *ENG
2-430-016 TblSepaDC:Low:2nd *ENG
2-430-017 EdSepaDC:Std:1st *ENG [1 to 100 / 50 / 1 /step]
Adjusts the size correction
coefficient table for the
discharge plate DC (leading
and traiing edges) for each
printing side.
2-430-018 EdSepaDC:Std:2nd *ENG
2-430-019 EdSepaDC:Low:1st *ENG
2-430-020 EdSepaDC:Low:2nd *ENG
Engine SP Mode Tables - SP2000
319
To Next Page
Loading...
