Ricoh Aficio SP C440DN - Page 325

2-443-009 PTr:Std:1Sid:S3 *ENG [100 to 995 / 135 / 5 %/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-443-010 PTr:Std:2Sid:S3 *ENG [100 to 995 / 325 / 5 %/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-443-011 PTr:Low:1:S3 *ENG [100 to 995 / 135 / 5 %/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-443-012 PTr:Low:2:S3 *ENG [100 to 995 / 325 / 5 %/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-443-013 PTr:Std:1Sid:S4 *ENG [100 to 995 / 220 / 5 %/step]
139 mm > S4 (Paper width)
2-443-014 PTr:Std:2Sid:S4 *ENG [100 to 995 / 330 / 5 %/step]
139 mm > S4 (Paper width)
2-443-015 PTr:Low:1:S4 *ENG [100 to 995 / 220 / 5 %/step]
139 mm > S4 (Paper width)
2-443-016 PTr:Low:2:S4 *ENG [100 to 995 / 330 / 5 %/step]
139 mm > S4 (Paper width)
2444 [Plain2:SzEnvCr:BW] DFU
Plain 2: Size Environment Correction: BW Printing Mode
Adjusts the size correction coefficient table of the plain 2 paper for the paper transfer
roller current for each paper size. SP2440 and SP2441 are multiplied by these SP
values.
Std: 260 mm/sec, Low: 85mm/sec
2-444-001 PTr:Std:1Sid:S1 *ENG [1 to 100 / 19 / 1 /step]
S1 size ≥ 194 mm (Paper width)
Engine SP Mode Tables - SP2000
323