2-511-012 PTr:Low:2:S3 *ENG [100 to 995 / 270 / 5%/step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-511-013 PTr:Mid:1Sid:S4 *ENG [100 to 995 / 200 / 5%/step]
139 mm > S4 (Paper width)
2-511-014 PTr:Mid:2Sid:S4 *ENG [100 to 995 / 435 / 5%/step]
139 mm > S4 (Paper width)
2-511-015 PTr:Low:1:S4 *ENG [100 to 995 / 200 / 5%/step]
139 mm > S4 (Paper width)
2-511-016 PTr:Low:2:S4 *ENG [100 to 995 / 435 / 5%/step]
139 mm > S4 (Paper width)
2512 [Thick1: SzCor: FC] DFU
Thick 1: Size Correction: FC Printing
Adjusts the size correction coefficient of the thick 1 paper for the paper transfer roller
current for each paper size. SP2502 and SP2507 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85 mm/sec
2-512-001 PTr:Mid:1Sid:S1 *ENG [100 to 995 / 100 / 5%/step]
S1 size ≥ 194 mm (Paper width)
2-512-002 PTr:Mid:2Sid:S1 *ENG
2-512-003 PTr:Low:1:S1 *ENG
2-512-004 PTr:Low:2:S1 *ENG
2-512-005 PTr:Mid:1Sid:S2 *ENG [100 to 995 / 150 / 5%/step]
194 mm > S2 size ≥ 165 mm (Paper
width)
2-512-006 PTr:Mid:2Sid:S2 *ENG [100 to 995 / 160 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-512-007 PTr:Low:1:S2 *ENG [100 to 995 / 150 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
5. System Maintenance Reference
338
To Next Page
Loading...
