2-564-004 PTr:2:S1 *ENG [1 to 100 / 38 / 1 /step]
S1 size ≥ 194 mm (Paper width)
2-564-007 PTr:1:S2 *ENG [1 to 100 / 13 / 1 /step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-564-008 PTr:2:S2 *ENG [1 to 100 / 38 / 1 /step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-564-011 PTr:1:S3 *ENG [1 to 100 / 13 / 1 /step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-564-012 PTr:2:S3 *ENG [1 to 100 / 38 / 1 /step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-564-015 PTr:1:S4 *ENG [1 to 100 / 13 / 1 /step]
139 mm > S4 (Paper width)
2-564-016 PTr:2:S4 *ENG [1 to 100 / 38 / 1 /step]
139 mm > S4 (Paper width)
2571 [Thick2:LE Correct] DFU
Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current or discharge plate DC at the
paper leading edge in each mode. SP2553 and SP2558 are multiplied by these SP
values.
• The paper leading edge area can be adjusted with SP2572.
2-571-001 PTr: 1st *ENG [0 to 995 / 100 / 5%/step]
2-571-002 PTr: 2nd *ENG
2-571-003 SepaDC:1st *ENG
2-571-004 SepaDC:2nd *ENG
Engine SP Mode Tables - SP2000
349
To Next Page
Loading...
