2-580-015 SepaDC:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thick 2 paper for the
discharge plate DC for each printing
side.
2-580-016 SepaDC:2nd
*ENG
[Thick2:Ed-Env.Cor] DFU
2-580-019 SepaDC:1st *ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the thick 2 paper for the
discharge plate DC (leading and
traiing edges) for each printing side.
2-580-020 SepaDC:2nd
*ENG
2601 [OHP: Bias]
Adjusts the DC voltage of the discharge plate for OHP.
2-601-001 Separation DC *ENG [0 to 6000 / 2000 / 10 -V /step]
2603 [OHP: Bias: BW]
Adjusts the current for the paper transfer roller for OHP in black-and-white mode.
2-603-001 Paper Transfer *ENG [0 to 230 / 8 / 1 – A /step]
2608 [OHP: Bias: FC]
Adjusts the current for the paper transfer roller for OHP in full color mode.
2-608-001 Paper Transfer *ENG [0 to 230 / 21 / 1 – A /step]
2611 [OHP: SzCor: BW]
OHP: Size Correction: BW Printing
Adjusts the size correction coefficient of the OHP paper for the paper transfer roller
current for each paper size. SP2603 and SP2608 are multiplied by these SP values.
2-611-003 Paper Transfer: S1 *ENG [100 to 995 / 100 / 5% /step]
S1 size ≥ 194 mm (Paper width)
Engine SP Mode Tables - SP2000
351
To Next Page
Loading...
