2-613-007 Paper Transfer: S2 *ENG [100 to 995 / 15 / 5% /step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-613-011 Paper Transfer: S3 *ENG [100 to 995 / 15 / 5% /step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-613-015 Paper Transfer: S4 *ENG [100 to 995 / 15 / 5% /step]
139 mm > S4 (Paper width)
2614 [OHP:Sz-Env.Cor:FC] DFU
OHP: Size Environment Correction: FC Printing
Adjusts the size correction coefficient of the OHP paper for the paper transfer roller
current for each paper size. SP2603 and SP2608 are multiplied by these SP values.
2-614-003 Paper Transfer: S1 *ENG [1 to 100 / 12 / 1 /step]
S1 size ≥ 194 mm (Paper width)
2-614-007 Paper Transfer: S2 *ENG [1 to 100 / 12 / 1 /step]
194 mm > S2 size ≥ 165 mm
(Paper width)
2-614-011 Paper Transfer: S3 *ENG [1 to 100 / 12 / 1 /step]
165 mm > S3 size ≥ 139 mm (Paper
width)
2-614-015 Paper Transfer: S4 *ENG [1 to 100 / 12 / 1 /step]
139 mm > S4 (Paper width)
2621 [OHP:LE Correct] DFU
OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current or discharge plate DC at the
paper leading edge in each mode. SP2603 and SP2608 are multiplied by these SP
values.
• The paper leading edge area can be adjusted with SP2622.
Engine SP Mode Tables - SP2000
353
To Next Page
Loading...
