3531 [No-use ProCon Set]
Adjusts the threshold for the process control at stand-by.
When the current condition has changed by more than the values of these SPs when
compared with the conditions at the previous operation, the process control at stand-
by is executed.
3-531-001 No-Use Time Set *ENG [0 to 1440 / 360 / 1 minute/step]
3-531-002 Temperature Range *ENG [0 to 99 / 10 / 1 deg/step]
3-531-003 RHumidity Change *ENG [0 to 99 / 50 / 1 %RH/step]
3-531-004 AHumidity Change *ENG [0 to 99 / 6 / 1 g/m
3
/step]
3-531-005 Max. Exe. Number *ENG Adjusts the maximum execution time for the
process control at stand-by.
[0 to 99 / 10 / 1 time/step]
3611 [DevGamma:Dspl/Set]
3-611-001 Bk (Current) *ENG Displays the current development gamma for
Bk
[0 to 5 / 0 / 0.01 mg/cm
2
/kV /step]
3-611-002 C (Current) *ENG Displays the current development gamma for
C/M/Y.
[0 to 5 / 0 / 0.01 mg/cm
2
/kV /step]
3-611-003 M (Current) *ENG
3-611-004 Y (Current) *ENG
3-611-005 Bk(TargetDisplay) *ENG Displays the target development gamma for Bk.
[0 to 5 / 0.85 / 0.01 mg/cm
2
/kV /step]
3-611-006 C (TargetDisplay) *ENG Displays the target development gamma for
C/M/Y.
[0 to 5 / 0.85 / 0.01 mg/cm
2
/kV /step]
3-611-007 M (TargetDisplay) *ENG [0 to 5 / 0.8 / 0.01 mg/cm
2
/kV /step]
3-611-008 Y (TargetDisplay) *ENG [0 to 5 / 0.77 / 0.01 mg/cm
2
/kV /step]
3800 [Toner Collection Bttl Full]
Engine SP Mode Tables - SP3000
417
To Next Page
Loading...
Need help?
General
