Engine SP Mode Tables - SP5000
SP5-XXX (Mode)
5001 [All Indecators On] *CTL -
Turns on or off the all indicators on the operation panel.
5024 [mm/inch Display Selection]
Display units (mm or inch) for custom paper sizes.
5-024-001 0:mm 1:inch *CTL 0: mm (Europe/Asia)
1: inch (USA)
5045 [Accounting Counter]
Selects the counting method.
NOTE: The counting method can be changed only once, regardless of whether the
counter value is negative or positive.
5-045-001 Counter Method *CTL [0 or 1 / 0 / - /step]
0: Developments
1: Prints
5051 [Toner Refill Detection Display]
Enables or disables the toner refill detection display.
5-051-001 - *CTL [0 or 1 / 0 / - /step] Alphanumeric
0: ON
1: OFF
5055 [Display IP Address]
Display or does not display the IP address on the operation panel.
5-055-001 - *CTL [0 or 1 / 0 / - /step]
0: No, 1: Yes
5. System Maintenance Reference
420