5-816-068 Cer Abnml Cause *CTL [0 to 255 / 0 / 1/step]
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has
expired.
2 An SSL error notification has been issued. Issued after the certification has
expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5-816-069 Cer Updt Reg ID *CTL [- / - / -]
The ID of the request for certification.
5-816-083 Firm Updating *CTL [0 to 5 / 0 / 1/step]
0: waiting for receiving firmware update.
1: waiting for scheduling firmware update
start.
2: waiting for user confirmation
3: preparing for device firmware update.
4: processing device firmware update.
5: termination processing
Displays the status of the firmware update
5-816-085 Firm Up User Conf *CTL [- / - / -]
This SP setting determines if the operator can confirm the previous version of the
firmware before the firmware update execution. If the option to confirm the previous
version is selected, a notification is sent to the system manager and the firmware
update is done with the firmware files from the URL.
Engine SP Mode Tables - SP5000
443
To Next Page
Loading...
Need help?
General
