7-803-061 Rotat.(%):PCU:Bk ENG [0 to 255 / - / 1 %/step]
7-803-062 Rotat.(%):PCU:C ENG [0 to 255 / - / 1 %/step]
7-803-063 Rotat.(%):PCU:M ENG [0 to 255 / - / 1 %/step]
7-803-064 Rotat.(%):PCU:Y ENG [0 to 255 / - / 1 %/step]
7-803-065 Rotat(%):Dev.U:Bk ENG [0 to 255 / - / 1 %/step]
7-803-066 Rotat(%):Dev.U:C ENG [0 to 255 / - / 1 %/step]
7-803-067 Rotat(%):Dev.U:M ENG [0 to 255 / - / 1 %/step]
7-803-068 Rotat(%):Dev.U:Y ENG [0 to 255 / - / 1 %/step]
7-803-073 Rotat(%):ITB Unit ENG [0 to 255 / - / 1 %/step]
7-803-074 Rotat(%):ITB ClnU ENG [0 to 255 / - / 1 %/step]
7-803-075 Rotat(%):Fus.Unit ENG [0 to 255 / - / 1 %/step]
7-803-076 Rotat(%):Fus.Roll ENG [0 to 255 / - / 1 %/step]
7-803-077 Rotat(%):Fus.Belt ENG [0 to 255 / - / 1 %/step]
7-803-078 Rotat(%):PTR Unit ENG [0 to 255 / - / 1 %/step]
7-803-079 Amt(%):ITB TC Btl ENG [0 to 255 / - / 1 %/step]
Displays how much of the unit's expected
lifetime has been used up.
-091 to
-108
Displays the value given by the following formula:
(Current printouts / Target printouts) x 100. This shows how much of the unit's
expected lifetime has been used up.
The Page% counter is based on printouts, not revolutions. If the number of printouts
reaches the limit, the machine enters the end condition for that unit. If the revolution
count lifetime is reached first, the machine also enters the end condition, even though
the Page% counter is still less than 100%.
7-803-091 Page (%): PCU: Bk ENG [0 to 255 / - / 1 %/step]
7-803-092 Page (%): PCU: C ENG [0 to 255 / - / 1 %/step]
7-803-093 Page (%): PCU: M ENG [0 to 255 / - / 1 %/step]
7-803-094 Page (%): PCU: Y ENG [0 to 255 / - / 1 %/step]
5. System Maintenance Reference
484
To Next Page
Loading...
