- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
8391 LSize PrtPGS *CTL [0 to 9999999/ 0 / 1 /step]
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, these counters are also
displayed in the User Tools display on the machine.
8-391-001 A3/DLT, Larger
8-391-003 BannaerPaper
8411 Prints/Duplex *CTL This SP counts the amount of paper (front/back
counted as 1 page) used for duplex printing. Last
pages printed only on one side are not counted.
[0 to 9999999/ 0 / 1 /step]
8421 T:PrtPGS/Dup Comb *CTL [0 to 9999999/ 0 / 1 /step]
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing. This is the total for all applications.
8424 P:PrtPGS/Dup Comb *CTL [0 to 9999999/ 0 / 1 /step]
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing by the printer application.
8427 O:PrtPGS/Dup Comb *CTL [0 to 9999999/ 0 / 1 /step]
These SPs count by binding and combine, and n-Up settings the number of pages
processed for printing by Other applications
8-42x-001 Simplex> Duplex
8-42x-004 Simplex Combine
8-42x-005 Duplex Combine
8-42x-006 2in1 2 pages on 1 side (2-Up)
Engine SP Mode Tables - SP8000
511
To Next Page
Loading...
