Ricoh SP 3710DN Service Manual

M0C3/M0C4/M0C5/M0C6/M0C7 vi SM
6.3.1 OVERVIEW ....................................................................................................... 6-12
6.3.2 ERROR MESSAGES ........................................................................................ 6-12
6.4 FAX ERROR CODES .................................................................................................. 6-20
6.4.1 FAX ERROR CODE STRUCTURE ................................................................... 6-20
6.4.2 FAX ERROR CODE TABLE .............................................................................. 6-21
6.5 JAM DETECTION ........................................................................................................ 6-24
6.5.1 PAPER JAM....................................................................................................... 6-24
6.5.2 ORIGINAL JAM (ADF/ARDF) ............................................................................ 6-26
6.6 IMAGE QUALITY ......................................................................................................... 6-27
6.6.1 PROBLEM AT REGULAR INTERVALS ............................................................ 6-27
6.7 OTHER PROBLEMS ................................................................................................... 6-28
6.7.1 DARK LINES IN HALFTONE AREAS AT 75MM INTERVALS .......................... 6-28
6.7.2 RECYCLED OR THIN PAPER IS SEVERELY CURLED AFTER PRINTING .. 6-28
6.7.3 WHEN FLUORESCENT/ LED LAMPS FLICKER (ONLY FOR 100V MODELS)6-29
6.7.4 STAIN APPEARS IN THE RIGHT AND THE LEFT EDGES ............................. 6-30
6.7.5 POOR PRINTING (OFFSET) ............................................................................ 6-31
6.7.6 WRINKLES APPEAR WHEN USING LIMP PAPER ......................................... 6-31
6.7.7 LOW IMAGE DENSITY ON SOLID IMAGES ................................................... 6-32
6.7.8 MOTTLED IMAGE ON SOLID IMAGES ........................................................... 6-33
6.7.9 TONER SCATTERED ON HORIZONTAL LINES ............................................. 6-33
7. DETAILED DESCRIPTIONS ....................................................... 7-1
7.1 GUIDANCE FOR THOSE WHO ARE FAMILIAR WITH PREDECESSOR PRODUCTS7-1
7.1.1 PRINTER MODELS: ........................................................................................... 7-1
7.1.2 MF MODELS: ...................................................................................................... 7-2
7.2 PRODUCT OVERVIEW ................................................................................................. 7-3
7.2.1 COMPONENT LAYOUT ...................................................................................... 7-3
7.2.2 PAPER PATH ....................................................................................................... 7-4
7.2.3 DRIVE LAYOUT .................................................................................................. 7-5
7.2.4 COMPONENT LAYOUT (PRINTER MODELS) .................................................. 7-6
Laser Exposure ....................................................................................................... 7-6
Paper Feed .............................................................................................................. 7-7
Fusing, Duplex, Paper Exit ...................................................................................... 7-8
Boards, Switches ..................................................................................................... 7-9
7.2.5 COMPONENT LAYOUT (MF MODELS) ........................................................... 7-10
ADF, Scanner ........................................................................................................ 7-10
Laser Exposure ..................................................................................................... 7-11
Paper Feed ............................................................................................................ 7-12
Fusing, Duplex, Paper Exit .................................................................................... 7-13
Boards, Switches ................................................................................................... 7-14

Ricoh SP 3710DN Specifications

General

Color	No
Duplex printing	-
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	32 ppm
Printer fonts	PCL, PostScript
Printing colors	Black
Maximum duty cycle	- pages per month
Page description languages	PCL 5e, PCL 6, PostScript 3
Total input capacity	300 sheets
Total output capacity	125 sheets
Maximum input capacity	550 sheets
Paper tray media weight	52 - 162 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.72 W
Power consumption (printing)	- W
Sustainability compliance	Yes
Sustainability certificates	ENERGY STAR
Sound pressure level (printing)	- dB
Product color	Black, White
Market positioning	Home & office
USB connector	USB Type-B
USB 2.0 ports quantity	1
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology	10/100Base-T(X)
Server operating systems supported	Windows Server 2008, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supported	Windows 10, Windows 7, Windows 8.1
Included cartridge capacity (black)	7000 pages

Weight and Dimensions

Depth	392 mm
Width	370 mm
Height	262 mm