Riso 9150 - Page 23

21
List of Settings for Each Mode
ComColor Series User’s Guide 09
*
1 This function is not available for ComColor 9110/9110R/7110/7110R/3110/3110R.
*
2 This function is not available for ComColor 3150/3150R.
*
3 This function is not available for ComColor 2150.
Add cover*
1
Specify this to add front and/or back cover. p. 1-21
Booklet binding Specify the type of booklet printing. (When using the optional
multifunction finisher)
p. 1-21
Binding side Specify the position for stapling and punching. (When using the optional
multifunction finisher)
p. 1-23
Staple Select the stapling method. (When using the optional multifunction
finisher or face down offset stapler)
p. 1-24
Punch Select the punching method. (When using the optional multifunction
finisher)
p. 1-25
Paper folding Select this when folding paper in two. (When using the optional
multifunction finisher)
p. 1-26
Output tray Specify the output tray. (When using the optional multifunction finisher or
stacking tray)
p. 1-26
Save/Call setting Save and call frequently used settings. p. 1-27
[Advanced] tab
Copies Enter the number of copies to print. p. 1-27
Print and pause To check the printing result, the machine stops after printing one set. p. 1-27
Program Specify this when distributing different numbers of copies to multiple
groups.
p. 1-27
Blank Paper Cut Down Specify this to not print blank pages of the original. p. 1-28
Continuous output Select this to switch the output tray automatically when the tray is full.
(When using the optional multifunction finisher, auto-control stacking tray,
or high capacity stacker)
p. 1-29
Watermark Specify the background watermark to be added to document pages. p. 1-29
Stamp Page/Date Stamp page number and date on the header or footer. p. 1-30
Job name Select this when setting a desired job name. p. 1-31
PIN code Assign a PIN code to a job to be printed or saved to a folder. p. 1-31
Save/Call setting Save and call frequently used settings. p. 1-32
Setting Description See