V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 5
User Manual
f
Control and Display Elements
3.3 Control and Display Elements of Control Unit 2 ∫LOCAL∫
(R&S EK 895) or Control Unit (R&S EK 896)
(see Fig. 3.1 for R&S EK 896 or Fig. 3.2 for R&S EK 895)
Description
If the LED assigned to key FRQ (32) is il>
luminated, the cursor (10) can be posi>
tioned by means of the cursor control keys
within the frequency field (9) below any
of the displayed figures. This does not
apply to the 10>MHz place!
In addition the cursor (10) can be shifted
to the right and out of the frequency field
(9), as a consequence the freely pro>
grammed stepwidth (see 3.1.7.3 and
3.1.18.1) for the tuning knob will become
effective.
For
R&S EK 895 only:
Upon actuation of key BFO (28) the cursor
(10) can be positioned by means of the
cursor control keys within the BFO field (8)
below any of the displayed figures.
A black bar in the status line indicates that
f the preamplifier and / or
f the noise blanker and / or
f the level/syllabic squelch and / or
f the notch filters A and B and / or
f a frequency offset
are active.
If necessary, activate the respective func>
tion via the separate functions menu 1
(see 3.1.20.2 to .5) and / or via the key
NOTCH / PBT (29).
No.
1
2
Control or display
element
Design
CURSOR
Two push>
buttons with
protective caps
(10.5¥10.5 mm)
Two push>
buttons with
protective caps
(6 ¥ 10.5 mm)
PREAMP NB SQ NOTCH PBT
R&S EK 896:
R&S EK 895:
6164.0717.02_01
> 3.73 >
To Next Page
Loading...
