Getting Started
R&S
®
FSW
64User Manual 1173.9411.02 ─ 19
Fig. 3-10: Time domain display of the calibration signal
5. Create a new channel for I/Q analysis:
a) Press the MODE key.
b) Tap the "IQ Analyzer" button to activate a channel for the I/Q Analyzer applica-
tion.
c) Tap the "Display Config" softkey to activate the SmartGrid mode.
d) Drag the "Real/Imag (I/Q)" icon from the evaluation bar to the SmartGrid.
Fig. 3-11: Inserting a Real/Imag diagram for I/Q analysis
e) Close the SmartGrid mode.
The "IQ Analyzer" channel displays the real and imaginary signal parts in separate
windows.
Trying Out the Instrument
To Next Page
Loading...
