Rohde & Schwarz FSW26 - How to Configure the Basic Instrument Settings

General Instrument Setup
R&S
®
FSW
601User Manual 1173.9411.02 ─ 19
External Monitor Off.................................................................................................... 601
Duplicate..................................................................................................................... 601
Setup...........................................................................................................................601
External Monitor Off
Only the internal monitor of the R&S FSW is used for display.
Duplicate
Both the internal and the external monitor are used.
Setup
User-defined configuration; opens the standard Windows configuration dialog box to
configure the display devices to be used
9.6 How to Configure the Basic Instrument Settings
The following step-by-step instructions demonstrate how to configure the basic instru-
ment settings. For details on individual functions and settings see chapter 9.3, "Gen-
eral Instrument Settings", on page 568.
The remote commands required to perform these tasks are described in chapter 9.3,
"General Instrument Settings", on page 568.
How to Configure the Basic Instrument Settings