Measurements
R&S
®
FSW
281User Manual 1173.9411.02 ─ 19
Remote command
The TOI can also be queried using the remote command CALCulate<n>:
MARKer<m>:FUNCtion:TOI:RESult? on page 800.
5.11.4 TOI Configuration
Third Order Intercept (TOI) measurements are selected via the "Third Order Intercept"
button in the "Select Measurement" dialog box. The measurement is started immedi-
ately with the default settings. It can be configured via the MEAS CONFIG key or in the
"Third Order Intercept" dialog box, which is displayed as a tab in the "Analysis" dialog
box, or when you select the "TOI Config" softkey from the "TOI" menu.
Third Order Intercept (TOI) Measurement
To Next Page
Loading...
