Rohde & Schwarz FSW26 - Getting Started; Preparing for Use; Putting into Operation

Getting Started
R&S
®
FSW
20User Manual 1173.9411.02 ─ 19
3 Getting Started
Note: the following chapters are identical to those in the printed R&S FSW Getting
Started manual.
● Preparing for Use....................................................................................................20
● Instrument Tour.......................................................................................................39
● Trying Out the Instrument....................................................................................... 58
● Operating the Instrument........................................................................................ 73
3.1 Preparing for Use
● Putting into Operation............................................................................................. 20
● Windows Operating System....................................................................................27
● Connecting USB Devices........................................................................................30
● Connecting an External Monitor..............................................................................31
● Setting Up a Network (LAN) Connection.................................................................33
● Configuring the Initial Instrument Settings.............................................................. 37
● Protecting Data Using the Secure User Mode........................................................ 37
3.1.1 Putting into Operation
This section describes the basic steps to be taken when setting up the R&S FSW for
the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric shock, fire,
personal injury, or damage.
●
Do not open the instrument casing.
●
Read and observe the "Basic Safety Instructions" at the beginning of this manual or
on the documentation CD-ROM, in addition to the safety instructions in the follow-
ing sections. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage
Note that the general safety instructions also contain information on operating condi-
tions that will prevent damage to the instrument. The instrument's data sheet may con-
tain additional operating conditions.
Preparing for Use