Rohde & Schwarz FSW26 - Status Reporting System

Network and Remote Operation
R&S
®
FSW
627User Manual 1173.9411.02 ─ 19
10.1.7 Status Reporting System
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. Both can be queried via GPIB bus or LAN interface
(STATus... commands, see chapter 11.11, "Using the Status Register",
on page 1044).
● Hierarchy of Status Registers............................................................................... 627
● Structure of a SCPI Status Register......................................................................629
● Contents of the Status Registers.......................................................................... 630
● Application of the Status Reporting System..........................................................641
● Reset Values of the Status Reporting System......................................................643
10.1.7.1 Hierarchy of Status Registers
As shown in the following figure, the status information is of hierarchical structure.
Remote Control Basics