Rohde & Schwarz FSW26 - Standard Files

Measurements
R&S
®
FSW
222User Manual 1173.9411.02 ─ 19
This setting is required to calculate the SEM limits according to standard 3GPP 37.141
V12.2.0.
Remote command:
[SENSe:]ESPectrum<sb>:MSR:GSM:CARR on page 757
Apply to SEM
Configures the SEM sweep list according to the specified MSR settings.
Remote command:
[SENSe:]ESPectrum<sb>:MSR:APPLy on page 754
5.6.5.6 Standard Files
In the "Standard Files" tab of the "Spectrum Emission Mask" dialog box you can save
the current measurement settings as a user-defined standard (xml file), or load stored
measurement settings. Furthermore, you can delete an existing settings file.
For details see chapter 5.6.6.1, "How to Manage SEM Settings Files", on page 228.
Selecting the Storage Location - Drive/ Path/ Files.....................................................222
File Name....................................................................................................................223
Load Standard.............................................................................................................223
Save Standard............................................................................................................ 223
Delete Standard.......................................................................................................... 224
Restore Standard Files............................................................................................... 224
Selecting the Storage Location - Drive/ Path/ Files
Select the storage location of the settings file on the instrument or an external drive.
The "Drive" indicates the internal (C:) or any connected external drives (e.g. a USB
storage device).
Spectrum Emission Mask (SEM) Measurement