Rohde & Schwarz FSW26 - Using the Status Register

Remote Commands
R&S
®
FSW
1044User Manual 1173.9411.02 ─ 19
DIAGnostic:SERVice:SINFo? <FileName>
This command creates a *.zip file with important support information. The *.zip file con-
tains the system configuration information ("device footprint"), the current eeprom data
and a screenshot of the screen display (if available).
This data is stored to the C:\R_S\Instr\user\ directory on the instrument. As a
result of this command, the created file name (including the drive and path) is returned.
You can use the resulting file name information as a parameter for the MMEM:COPY
command to store the file on the controller PC.
(See MMEMory:COPY on page 993)
If you contact the Rohde&Schwarz support to get help for a certain problem, send this
file to the support in order to identify and solve the problem faster.
Return values:
<FileName> C:\R_S\Instr\user\<R&S Device ID>_<CurrentDate>_<Current-
Time>
String containing the drive, path and file name of the created
support file, where the file name consists of the following ele-
ments:
<R&S Device ID>: The unique R&S device ID indicated in the
"Versions + Options" information
(See chapter 9.3.4.2, "Information on Versions and Options",
on page 578)
<CurrentDate>: The date on which the file is created
(<YYYYMMDD>)
<CurrentTime>: The time at which the file is created
(<HHMMSS>)
Example:
DIAG:SERV:SINF?
Result:
"c:\R&S\instr\user\FSW-26_1312.8000K26-100005-xx_20130116_165858.zip"
Copy to controller PC:
MMEM:COPY "c:\R&S\instr\user\FSW-26_
1312.8000K26-100005-xx_20130116_165858.zip",
"S:\Debug\FSW-26_1312.8000K26-100005-xx_
20130116_165858.zip"
Usage: Query only
Manual operation: See "Creating R&S Support Information" on page 584
11.11 Using the Status Register
For more information on the contents of the status registers see:
●
"STATus:OPERation Register" on page 633
●
"STATus:QUEStionable:ACPLimit Register" on page 636
Using the Status Register