Common Analysis and Display Functions
R&S
®
FSW
448User Manual 1173.9411.02 ─ 19
Fig. 7-4: Multiple zoom
Using the zoom area to restrict a peak search
The selected zoom area can be used to restrict the search range for a peak search,
but only in single zoom mode (see "Using Zoom Limits" on page 501).
7.2.2 Zoom Functions
The zoom functions are only available from the toolbar.
Single Zoom................................................................................................................448
Multiple Zoom..............................................................................................................448
Restore Original Display............................................................................................. 449
Deactivating Zoom (Selection mode)..........................................................................449
Single Zoom
A single zoom replaces the current diagram by a new diagram which displays an
enlarged extract of the trace. This function can be used repetitively until the required
details are visible.
Remote command:
DISPlay[:WINDow<n>]:ZOOM:STATe on page 907
DISPlay[:WINDow<n>]:ZOOM:AREA on page 907
Multiple Zoom
Zoomed Displays
To Next Page
Loading...
