Rohde & Schwarz FSW26 - Selecting the Items to Store

Remote Commands
R&S
®
FSW
997User Manual 1173.9411.02 ─ 19
Parameters:
<Directory> String containing the path of the directory to delete.
Note that the directory you want to remove may contain no con-
tents.
Usage: Event
11.9.2 Selecting the Items to Store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(MMEMory:SELect[:ITEM]...), or only those from the currently selected channel
(MMEM:SELect:CHANnel[:ITEM]...) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL...........................................................................997
MMEMory:SELect[:ITEM]:ALL.........................................................................................997
MMEMory:SELect:CHANnel[:ITEM]:DEFault.....................................................................998
MMEMory:SELect[:ITEM]:DEFault................................................................................... 998
MMEMory:SELect:CHANnel[:ITEM]:HWSettings............................................................... 998
MMEMory:SELect[:ITEM]:HWSettings..............................................................................998
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL................................................................. 998
MMEMory:SELect[:ITEM]:LINes:ALL................................................................................998
MMEMory:SELect:CHANnel[:ITEM]:NONE....................................................................... 999
MMEMory:SELect[:ITEM]:NONE..................................................................................... 999
MMEMory:SELect:CHANnel[:ITEM]:SGRam.....................................................................999
MMEMory:SELect[:ITEM]:SGRam................................................................................... 999
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive]........................................................ 999
MMEMory:SELect[:ITEM]:TRACe[:ACTive].......................................................................999
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL....................................................... 999
MMEMory:SELect[:ITEM]:TRANsducer:ALL......................................................................999
MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL
This command includes all items when storing or loading a configuration file.
The items are:
● Hardware configuration: MMEMory:SELect[:ITEM]:HWSettings
● Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL
● Spectrogram data: MMEMory:SELect[:ITEM]:SGRam
● Trace data: MMEMory:SELect[:ITEM]:TRACe[:ACTive]
● Transducers: MMEMory:SELect[:ITEM]:TRANsducer:ALL
Example:
MMEM:SEL:ALL
Usage: Event
Manual operation: See "Items" on page 548
Managing Settings and Results