Remote Commands
R&S
®
FSW
1011User Manual 1173.9411.02 ─ 19
Return values:
<PrinterName> String containing the name of the first printer as defined in Win-
dows.
If the command cannot find a printer, it returns an empty string
(' ').
Usage: Query only
Manual operation: See "Printer Name" on page 563
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
This command queries the name of available printers.
You have to use SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? for this
command to work properly.
Return values:
<PrinterName> String containing the name of one printer as defined in Windows.
To get a complete list of printers you have to send this query
several times until no more printers could be found. In that case,
the return value is an empty string (' '). Further queries after the
empty string result in an error.
Usage: Query only
Manual operation: See "Printer Name" on page 563
SYSTem:COMMunicate:PRINter:SELect<device> <PrinterName>
This command selects the printer that processes jobs sent by the R&S FSW.
Use HCOPy:DESTination<device> to select another output destination.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<PrinterName> String containing the printer name.
Use
• SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt? and
• SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
to query all available printers.
*RST: NONE
Manual operation: See "Printer Name" on page 563
11.9.5 Storing Measurement Results
The following commands can be used to store the results of a measurement.
Managing Settings and Results
To Next Page
Loading...
