Rohde & Schwarz FSW26 - APD and CCDF Configuration

Measurements
R&S
®
FSW
255User Manual 1173.9411.02 ─ 19
5.8.5 APD and CCDF Configuration
Configuration consists of the following settings:
● Basic Settings....................................................................................................... 255
● Gate Range Definition for APD and CCDF........................................................... 257
● Scaling for Statistics Diagrams............................................................................. 259
5.8.5.1 Basic Settings
APD measurements are selected via the "APD" button in the "Select Measurement"
dialog box. CCDF measurements are selected via the "CCDF" button in the "Select
Measurement" dialog box. The measurements are started immediately with the default
settings. They can be configured via the MEAS CONFIG key or in the "APD/CCDF"
Statistical Measurements (APD, CCDF)