Rohde & Schwarz FSW26 - Storing or Printing Screenshots

Remote Commands
R&S
®
FSW
1005User Manual 1173.9411.02 ─ 19
SYSTem:PRESet:CHANnel[:EXECute]
This command restores the default instrument settings in the current channel.
Use INST:SEL to select the channel.
For details see chapter 8.1.1, "Factory Default Configuration", on page 539.
Example:
INST 'Spectrum2'
Selects the channel for "Spectrum2".
SYST:PRES:CHAN:EXEC
Restores the factory default settings to the "Spectrum2" channel.
Usage: Event
Manual operation: See "Preset Channel" on page 313
11.9.4 Storing or Printing Screenshots
Useful commands to configure screenshots described elsewhere
● MMEMory:NAME on page 995
Remote commands exclusive to configure screenshots
DISPlay:LOGO............................................................................................................ 1005
HCOPy:ABORt............................................................................................................ 1006
HCOPy:CMAP<item>:DEFault<colors>.......................................................................... 1006
HCOPy:CMAP<item>:HSL............................................................................................1006
HCOPy:CMAP<item>:PDEFined................................................................................... 1007
HCOPy:DESTination<device>.......................................................................................1007
HCOPy:DEVice:COLor................................................................................................. 1008
HCOPy:DEVice:LANGuage<device>............................................................................. 1008
HCOPy[:IMMediate<device>]........................................................................................ 1009
HCOPy[:IMMediate<device>]:NEXT...............................................................................1009
HCOPy:ITEM:ALL........................................................................................................1009
HCOPy:ITEM:WINDow:TEXT........................................................................................1010
HCOPy:PAGE:ORIentation<device>..............................................................................1010
HCOPy:TDSTamp:STATe<device>............................................................................... 1010
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?...................................................... 1010
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?.................................................... 1011
SYSTem:COMMunicate:PRINter:SELect<device>...........................................................1011
DISPlay:LOGO <State>
Activates/deactivates the printout of the Rohde & Schwarz company logo in the upper
left corner.
Parameters:
<State> ON | OFF
*RST: ON
Managing Settings and Results