Measurements
R&S
®
FSW
114User Manual 1173.9411.02 ─ 19
For details see chapter 5.8, "Statistical Measurements (APD, CCDF)", on page 251.
Remote command:
CALCulate<n>:STATistics:APD[:STATe] on page 778
Results:
CALCulate:STATistics:RESult<t>? on page 785
CCDF
Measures the complementary cumulative distribution function (CCDF) and opens a
submenu to configure the measurement.
For details see chapter 5.8, "Statistical Measurements (APD, CCDF)", on page 251.
Remote command:
CALCulate<n>:STATistics:CCDF[:STATe] on page 778
Results:
CALCulate<n>:STATistics:CCDF:X<t>? on page 785
CALCulate:STATistics:RESult<t>? on page 785
Time Domain Power
Measures the power in zero span and opens a submenu to configure the measure-
ment. For details see chapter 5.2, "Basic Measurements", on page 115.
A time domain power measurement is only possible for zero span.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:SUMMary[:STATe] on page 789
chapter 11.5.9, "Measuring the Time Domain Power", on page 787
TOI
Measures the third order intercept point and opens a submenu to configure the mea-
surement.
For details see chapter 5.11, "Third Order Intercept (TOI) Measurement",
on page 275.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:TOI[:STATe] on page 799
CALCulate<n>:MARKer<m>:FUNCtion:TOI:RESult? on page 800
chapter 11.5.11, "Measuring the Third Order Intercept Point", on page 799
AM Mod Depth
Measures the AM modulation depth and opens a submenu to configure the measure-
ment. An AM-modulated carrier is required in the window to ensure correct operation.
For details see chapter 5.12, "AM Modulation Depth Measurement", on page 285.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth[:STATe] on page 801
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth:RESult? on page 802
chapter 11.5.12, "Measuring the AM Modulation Depth", on page 801
Harmonic Distortion
Measures the harmonic distortion, including the total harmonic distortion, and opens a
submenu to configure the measurement.
Available Measurement Functions
To Next Page
Loading...
