Remote Commands
R&S
®
FSW
999User Manual 1173.9411.02 ─ 19
MMEMory:SELect:CHANnel[:ITEM]:NONE
MMEMory:SELect[:ITEM]:NONE
This command does not include any of the following items when storing or loading a
configuration file.
● Hardware configuration: MMEMory:SELect[:ITEM]:HWSettings
● Limit lines: MMEMory:SELect[:ITEM]:LINes:ALL
● Trace data: MMEMory:SELect[:ITEM]:TRACe[:ACTive]
● Transducers: MMEMory:SELect[:ITEM]:TRANsducer:ALL
Example:
MMEM:SEL:NONE
Usage: Event
Manual operation: See "Items" on page 548
MMEMory:SELect:CHANnel[:ITEM]:SGRam <State>
MMEMory:SELect[:ITEM]:SGRam <State>
This command includes or excludes spectrogram data when storing or loading a con-
figuration file.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
MMEM:SEL:SGR ON
Adds the spectrogram data to the list of data subsets.
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive] <State>
MMEMory:SELect[:ITEM]:TRACe[:ACTive] <State>
This command includes or excludes trace data when storing or loading a configuration
file.
Parameters:
<State> ON | OFF
*RST: OFF, i.e. no traces is stored
Example:
MMEM:SEL:TRAC ON
Manual operation: See "Items" on page 548
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL <State>
MMEMory:SELect[:ITEM]:TRANsducer:ALL <State>
This command includes or excludes transducer factors when storing or loading a con-
figuration file.
Managing Settings and Results
To Next Page
Loading...
